China Standard Special Timing Belt Pulley with Zinc Plated supplier

Item Description

CZPT Equipment offers a extensive assortment of large good quality Timing Belt Pulleys and Toothed Bars/ Timing Bars. Normal and non-standard pulleys according to drawings are available.

 
Sorts of substance:
  1. AlCuMgPb 6061 6082 Aluminum Timing Pulley
  2. C45E 1045 S45C Carbon Metal Timing Pulley
  3. GG25 HT250 Cast Iron Timing Pulley
  4. SUS303 SUS304 AISI431 Stainless Metal Timing Pulley
  5. Other materials on demand from customers,  this kind of as cooper,  bronze and plastic
 
Varieties of surface area treatment
 1.  Anodized area -Aluminum Pulleys
 2.  Hard anodized surface area — Aluminum Pulleys
 3.  Black Oxidized surface — Steel Pulleys
 4. Zinc plated surface area — Steel Pulleys
 5. Chromate area — Steel Pulleys Forged Iron Pulleys
 6. Nickel plated surface area –Metal Pulleys Solid Iron Pulleys
 
Types of teeth profile:

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL .08″(2.032MM)
XL one/5″(5.08MM)
L three/8″(9.525MM)
H one/2″(12.7MM)
XH seven/8″(22.225MM)
XXH one 1/4″(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

 
Sorts of pitches and measurements

Imperial Inch Timing Belt Pulley,
one.     Pilot Bore MXL571 for 6.35mm timing belt enamel number from 16 to 72
2.  Pilot Bore XL037 for 9.53mm timing belt tooth amount from 10 to 72
three.  Pilot Bore, Taper Bore L050 for 12.7mm timing belt enamel number from 10 to one hundred twenty
4.  Pilot Bore, Taper Bore L075 for 19.05mm timing belt teeth number from ten to 120
5.  Pilot Bore, Taper Bore L100 for 25.4mm timing belt tooth variety from ten to 120
six.  Pilot Bore, Taper Bore H075 for 19.05mm timing belt tooth variety from fourteen to fifty
7.  Pilot Bore, Taper Bore H100 for twenty five.4mm timing belt teeth number from fourteen to 156
8.  Pilot Bore, Taper Bore H150 for 38.1mm timing belt tooth amount from 14 to 156
9.  Pilot Bore, Taper Bore H200 for fifty.8mm timing belt teeth amount from fourteen to 156
ten.  Pilot Bore, Taper Bore H300 for 76.2mm timing belt tooth amount from fourteen to 156
11.  Taper Bore XH200 for fifty.8mm timing belt enamel variety from 18 to one hundred twenty
12.  Taper Bore XH300 for seventy six.2mm timing belt tooth number from eighteen to 120
13.  Taper Bore XH400 for one zero one.6mm timing belt enamel amount from 18 to one hundred twenty

Metric Timing Belt Pulley T and AT
one.  Pilot Bore T2.5-16 for 6mm timing belt enamel amount from twelve to 60 
2.   Pilot Bore T5-21 for 10mm timing belt tooth amount from ten to 60 
three.   Pilot Bore T5-27 for 16mm timing belt teeth amount from ten to 60 
four.   Pilot Bore T5-36 for 25mm timing belt teeth quantity from 10 to 60 
5.   Pilot Bore T10-31 for 16mm timing belt enamel number from twelve to 60 
six.   Pilot Bore T10-40 for 25mm timing belt teeth number from twelve to 60 
seven.   Pilot Bore T10-47 for 32mm timing belt teeth amount from eighteen to 60 
8.   Pilot Bore T10-66 for 50mm timing belt enamel variety from 18 to 60
nine.  Pilot Bore AT5-21 for 10mm timing belt tooth number from twelve to 60
ten. Pilot Bore AT5-27 for 16mm timing belt tooth amount from twelve to 60
11. Pilot Bore AT5-36 for 25mm timing belt tooth variety from twelve to 60 
twelve. Pilot Bore AT10-31 for 16mm timing belt tooth quantity from 15 to 60 
thirteen. Pilot Bore AT10-40 for 25mm timing belt teeth variety from fifteen to 60 
fourteen. Pilot Bore AT10-47 for 32mm timing belt tooth amount from eighteen to 60 
15. Pilot Bore AT10-66 for 50mm timing belt teeth variety from eighteen to sixty
  
Metric Timing Belt Pulley HTD3M, 5M, 8M, 14M 
1.  HTD3M-06 3M-09 3M-fifteen enamel amount from 10 to 72 
two.  HTD5M-09 5M-15 5M-twenty five teeth variety from 12 to 72 
three.  HTD8M-20 8M-30 8M-fifty 8M-eighty five enamel variety from 22 to 192 
4.  HTD14M-40 14M-55 14M-85 14M-one hundred fifteen 14M-one hundred seventy tooth amount from 28-216 
5.  Taper Bore HTD5M-15 8M-20 8M-30 8M-fifty 8M-85 14M-forty 14M-fifty five 14M-eighty five
     14M-one hundred fifteen 14M-170

Metric Timing Belt Pulleys for Poly Chain GT2 Belts 
1.      PCGT8M-twelve PCGT8M-21 PCGT8M-36  PCGT8M-62 
2.      PCGT14M-twenty PCGT14M-37 PCGT14M-sixty eight PCGT14M-90 PCGT14M-125

Electricity Grip CZPT Tooth/ PGGT 2GT, 3GT and 5GT 
one. 2GT-06, 2GT-09 for timing belt width 6mm and 9mm 
two. 3GT-09, 3GT-fifteen for timing belt width 9mm and 15mm 
three. 5GT-fifteen, 5GT-twenty five for timing belt width 15mm and 25mm

OMEGA RPP HTD Timing Pulleys 
1.   RPP3M-06 3M-09 3M-fifteen teeth amount from ten to 72 
2.   RPP5M-09 5M-15 5M-25 tooth variety from 12 to 72 
3.   RPP8M-twenty 8M-thirty 8M-fifty 8M-eighty five teeth amount from 22 to 192 
4.   RPP14M-40 14M-55 14M-85 14M-a hundred and fifteen 14M-one hundred seventy teeth number from 28-216 
five.  Taper Bore RPP5M-fifteen 8M-twenty 8M-thirty 8M-fifty 8M-eighty five 14M-40 14M-fifty five 14M-eighty five
     14M-115 14M-170

US $1.2
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO
Pulley Sizes: Timing
Manufacturing Process: Sawing
Material: Carbon Steel
Surface Treatment: Blackening
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M
US $1.2
/ Piece
|
1 Piece

(Min. Order)

###

Certification: ISO
Pulley Sizes: Timing
Manufacturing Process: Sawing
Material: Carbon Steel
Surface Treatment: Blackening
Application: Chemical Industry, Grain Transport, Mining Transport, Power Plant

###

Samples:
US$ 3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Teeth Profile Pitch
HTD 3M,5M,8M,14M,20M
AT AT5,AT10,AT20
T T2.5,T5,T10
MXL 0.08"(2.032MM)
XL 1/5"(5.08MM)
L 3/8"(9.525MM)
H 1/2"(12.7MM)
XH 7/8"(22.225MM)
XXH 1 1/4"(31.75MM)
STS STPD S2M,S3M,S4.5M,S5M,S8M,S14M
RPP RPP5M,RPP8M,RPP14M,RPP20M
PGGT PGGT  2GT, 3GT and 5GT
PCGT GT8M,GT14M

What Is a Pulley?

The pulley is a wheel mounted on a shaft or axle. Its purpose is to support the movement of a cable that is taut. This cable transfers power to a shaft. However, there are certain safety precautions that you should follow when using a pulley. Read on to learn more! Listed below are common uses and their main parts. Listed below are some of the benefits of using a pulley.
pulley

Common uses of a pulley

A pulley is a common mechanical device used to increase the force needed to lift a heavy object. Most commonly, these devices are used in construction equipment. These machines use high-tension ropes to transfer heavy objects from one floor to another. Other common uses of a pulley include buckets and flagpoles. These devices are extremely useful in a wide range of applications. To learn more about the common uses of pulleys, keep reading.
A pulley is a wheel with grooves for holding rope. Its purpose is to change the direction and point at which a pulling force acts. It is usually used in sets to reduce the amount of force needed to lift a load, but the work involved is similar. Pulleys are also used in rock climbing devices. For many applications, a pulley is a vital part of construction.
The most common use of a pulley involves hoisting and lowering a flag. Other examples include clotheslines, bird feeders, and escalators. Pulleys are also commonly used on oil derricks. Many other common applications include hoisting and lowering garage doors. Pulley systems are also used in engines and cranes. For more information, check out our interactive pulley diagram!
Pulleys can also be used to lower total work required for a task. In many cases, a pulley will consist of two parts: the pulley hub and the shaft pulley. The hub clamps the shaft pulley, while the pulley itself is connected to the motor or other device. If you’re looking for a pulley, it’s important to learn how it works.
The most common uses for a pulley involve lifting heavy objects, and the mechanism used to lift them is known as a pulley. A pulley is an industrial device that uses two wheels to reduce the force needed to lift a weight. The pulley reduces this force by half by allowing the user to pull on the rope four times as far. The pulley also allows for a smaller lifting distance.

Main parts of a pulley

A pulley consists of the main element of a system. This is typically a cable, rope, belt, or chain. There are two basic types of pulleys – a Driver Pulley and a Follower Pulley. Pulleys are available in small and large sizes. The periphery part of the pulley is called the Face, and the protruding middle part is called the Crown. A pulley’s face can be round, rectangular, or even “V” shaped.
The first pulley was created by the Greek mathematician Archimedes in the third century BCE. These simple machines are made of a rope, an axle, and a wheel. The pulley’s end is attached to a person, object, or motor. These machines can be used in various tasks to lift heavy objects. The pulley is a great mechanical advantage for any lifter.
The ideal mechanical advantage of a pulley is defined by the number of rope segments that pull an object. The higher the number of loops on the rope, the higher the mechanical advantage. The greater the mechanical advantage, the less force is required to move the object. Likewise, the greater the distance the rope traverses, the higher the mechanical advantage of a pulley. There are several different types of pulley, depending on their combination of rope, wheel, and rope.
The basic components of a pulley are the face and hub, and the rope is threaded into the center of the pulley. The pulley is usually made of a rope and can be used to lift heavy weights. It can also be used to apply great force in any direction. Step pulleys have multiple faces, which are fixed in sequence. They can also increase the speed of the driven pulley.
A pulley is a simple machine consisting of a wheel, rope, or chain. These parts are crucial for making moving and lifting easier. Because they change the direction and magnitude of force, they can be a useful tool. Some pulleys even change direction. You can learn more about the pulley by downloading this resource today. The resources are designed to support the new 9-1 GCSEs in Design & Technology and Engineering.
pulley

Mechanical advantage

Pulleys have been used to move heavy objects for centuries. When two rope sections are used, the weight of a 100kg mass can be moved with only 500 newtons of force. Adding an extra pulley increases the mechanical advantage. If the pulley has two wheels, the distance between the rope sections and the wheel grooves is only half the distance, but the mechanical advantage still applies. Adding another pulley increases the mechanical advantage, but can be risky.
Mechanical advantage is the ratio of force used versus force applied. The calculations are made under the assumption that the ropes and weights do not elongate or lose energy due to friction. If the weights are very light, the mechanical advantage is greater than that in the real world. To calculate the mechanical advantage, the weight of the load to be lifted must be the same as the weight of the person using the pulley.
A single moveable pulley has a mechanical advantage of two. The weight passes around the pulley, and one end of the rope is attached to a fixed point. The pulling force is then applied to the other end of the rope. The distance the weight travels doubles, or halved, depending on the direction of the pulley. Adding a second pulley reduces the distance and the effort required to lift it.
There are several ways to calculate the mechanical advantage of a pulley system. Some methods are specific to certain types of systems, while others work for all systems. The T-Method is a good choice in many applications, as it calculates the units of tension for each rope segment. Once you have determined the input force, you need to determine the maximum force that will be applied to each component. A compound pulley, for example, will require 4 units of tension for each rope segment.
In simple terms, the effort is the amount of force needed to lift the load. This force is measured in newtons (N). A mechanical advantage is often presented without units. If the student does not have this unit, you may need to convert the units to newtons, since one kilogram is equal to 10 newtons. If you can’t figure out the units of effort, you can use the KWL chart provided by the teacher.
pulley

Safety precautions

There are a few safety precautions you should take when using a pulley. First, always check the SWL (safe working load) before attaching anything to the pulley. This indicates the maximum weight and angle the pulley can safely handle. Second, make sure that your work area is free from people and debris. Third, wear a hard hat to protect your head from blows and falling objects.
Another important consideration is anchoring. Although the pulley reduces the weight of an object, it is not enough to eliminate the weight. This is especially true if you are hoisting a heavy object, such as a motorcycle or lawnmower. It is important to ensure that the anchoring point can support the entire weight of the load. It is also important to follow proper anchoring procedures when using a pulley to lift a motorcycle or lawnmower.
In addition to the safety latch, you should use a tag line to control the suspended load. Remember that a chain pulley block is necessary for vertical lifting. You should also wear personal protective equipment (PPE) while using a pulley to avoid injuries. If your workplace does not have an PPE policy, you should consider implementing a similar policy. These safety guidelines are a good start.
If you are using a pulley to lift heavy objects, make sure to wear gloves. Those who are not familiar with rope-pulling will have an easier time demonstrating how it works. If you are using a rope-pulley system in a classroom, be sure to follow lab safety guidelines. Wear cloth gloves, clear the area, and do not jerk the rope. In addition, never allow yourself to be pulled into the rope by an unfamiliar person.
Another important safety precaution when using a pulley is to ensure that the anchor point for your system is adequate to support the weight of the object being lifted. Check with the manufacturer of the pulley to find out what its weight limit is, as some types of pulleys are designed to lift much heavier weights than others. It is important to follow all manufacturer’s instructions when using a pulley.

China Standard Special Timing Belt Pulley with Zinc Plated     supplier China Standard Special Timing Belt Pulley with Zinc Plated     supplier
editor by czh 2023-01-07

flat pulley

As one of leading flat pulley manufacturers, suppliers and exporters of mechanical products, We offer flat pulley and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of flat pulley

Recent Posts